Single -layer two -layer three -layer polyester forming mesh belt
grinding concentrated paper making mesh belt
Introduction:
Polyester forming fabric for paper making paper making forming
fabric mesh paper making screen mesh polyester mesh lining fabric,
according to the different weave ways used for different speeds of
paper machine
Polyester paper making forming mesh can be divided into 4-shed,
5-shed, 7-shed, 8-shed single layer fabric 7-shed, 8-shed double
layer fabric, 8-shed 16-shed double and a half layer fabric, and
three layer fabric according to the weaving type.
4-shed single layer fabrics is the standard of polyester forming
fabrics in making paper. It is used in wide range such as:
newspaper, offset printing paper, Chemical pulp high-grade paper,
test liner, corrugated paper. It is usually by machine middle and
slow paper machine.
5-Shed single layer fabric has a good wear wear-ability and
dehydration, regular and uniform opening, vestige inconspicuous,
high rate of adhesion, long life. It is suitable for making tobacco
paper and tissue paper.
7-shed single layer fabric has good wear-ability, steady size, high
rate of adhesion and long life. It is suitable for making
high-quality press light paper, offset point paper, low ration
original paper, it is the perfect paper of high speed paper
machine.
8-shed double layer fabric is suitable for quality printing paper,
tissue paper and the pulp, board paper.
Specifcation:
| Product name | Polyester 1.5 layers 2layers 3 layers paper making forming fabric |
| Material | 100% polyester |
| Woven structure | Plain woven |
| Air permeability(m3/m2/h) | 3800-5000 |
| Application | Middle and high speed paper machine making culture paper |
Usage:
Fixing machine
Paper making fabric
Bubble fitting machine
High -speed pulp washing machine
Dryer machine
Melting spray cloth conveyor
Advantage:
1.High fiber support index, good retention, and good drainage;
2.smooth surface and the paper features are good.
3.Good dewatering performance, anti-wear, easy to clean;
4.Easy paper feeding, dimensional stability and good running
stability
Filament diameter mm |
Density/cm |
Tensile strength N/cm |
Weight Kg/m2 |
Thickness mm |
Mesh mm Warp/weft |
Aperture mm Warp/weft |
L/m2/S 200Pa |
Warp |
Weft |
Warp |
Weft |
| joint | | | | | |
| 1.0 | 1.0 | 2.85 | 2.65 | 1600 | 650 | 0.6 | 1.85 | 7.1*6.73 | 2.5*2.77 | 12600 |
| 1.0 | 1.0 | 3.2 | 3.25 | 1600 | 650 | 0.8 | 1.86 | 8.1*8.2 | 2.12*2.07 | 10500 |
| 0.9 | 0.9 | 3.9 | 3.65 | 1600 | 650 | 0.55 | 1.7 | 9.6*9.3 | 1.66*1.83 | 9000 |
| 0.9 | 0.9 | 4.65 | 4.7 | 1600 | 650 | 0.95 | 1.66 | 12*12 | 1.25*1.22 | 8100 |
| 0.5 | 0.6 | 4.4 | 5.2 | 1600 | 650 | 0.58 | 1.23 | 12*13.2 | 1.72*1.32 | 8500 |
| 0.6 | 0.6 | 5.9 | 5.6 | 1600 | 650 | 0.62 | 1.1 | 14.98*14.2 | 1.09*1.18 | 8210 |
| 0.8 | 0.8 | 5.1 | 5.3 | 1600 | 650 | 0.89 | 1.48 | 13*13.5 | 1.16*1.08 | 6350 |
