2*2mm PTFE Open Mesh Conveyor Belts For For Drying And Conveying
PTFE Open Mesh Conveyor Belts Description
PTFE open mesh conveyor belts are used in applications such as the
drying of printed products for example; point of display stands,
T-shirts, glass and mass produced paper prints. Print dryers
usually opt for Ultra violet, Infra red or hot air as the heat
source to dry.
Other applications range from the drying of cereals, non woven's,
charcoal interlinings, carpet & carpet tiles, printed circuit
boards and shrink-wrap tunnels but to name a few.
PTFE open mesh conveyor belts are also known as teflen conveyor belt, teflen conveyor belt, PTFE
conveyor belt and high temperature resistant conveyor belt. teflen
conveyor belt is divided into teflen mesh conveyor belt and teflen
high-temperature cloth, both of which are made of teflen resin
coated with glass fiber cloth.The teflen mesh conveyor belt is
defined with mesh size, mainly including 1 x 1MM, 2 x 2.5mm, 4 x
4MM, 10 x 10MM, etc., and is divided into single and double weft
teflen mesh conveyor belt according to the longitude and latitude
lines.teflen high temperature cloth is used to distinguish the
specification by thickness, and the thinnest is up to 0.08MM.
| Material | PTFE |
| Standard | 1*1,2*2,4*4mesh,10*10mesh |
| width | as requirement |
| Standing Temperature | 70 to 260 |
| Weight | 120-160g/m2 |
| length | As requirement |
Features of PTFE open mesh conveyor belts:
Used for low - 70 ℃, high temperature 260 ℃, has the climate
resistance, anti-aging.Through practical application, such as under
the condition of 250 ℃ high temperature placed 200 days in a row,
not only low intensity will not change, and also do not reduce
weight;Placed under the high temperature of 350 ℃, 120 hours, the
weight only decreases about 0.6%;In 180 ℃ cryogenic circumstance
and can keep the original softness.
Specification of the teflen conveyor belt:
| Item | Aperture | material | Thickness | weight | temperature resistance | max width | Tensile strength |
| 1 | 1x 1mm | Fiberglass | 0.5mm | 370g /m 2 | -70 -260 ℃ | 4m | 310/290 N/cm |
| 2 | 2x 2mm | Fiberglass | 0.7mm | 450g /m 2 | -70 -260 ℃ | 4m | 350/310 N/cm |
| 3 | 4x 4mm | Fiberglass | 1.0mm | 400g /m 2 | -70 -260 ℃ | 4m | 390/320 N/cm |
| 4 | 4x 4mm | Fiberglass | 1.0mm | 450g /m 2 | -70 -260 ℃ | 4m | 390/320 N/cm |
| 5 | 4x 4mm | Fiberglass | 1.2mm | 600g /m 2 | -70 -260 ℃ | 4m | 895/370 N/cm |
| 6 | 4x 4mm | Fiberglass | 1.0mm | 500g /m 2 | -70 -260 ℃ | 4m | 395/370 N/cm |
| 7 | 4x 4mm | Fiberglass | 1.0mm | 500g /m 2 | -70 -260 ℃ | 4m | 900/600 N/cm |
| 8 | 4x 4mm | Fiberglass | 1.0mm | 550g /m 2 | -70 -260 ℃ | 4m | 395/370 N/cm |
| 9 | 10x 10mm | Fiberglass | 1.2mm | 450g /m 2 | -70 -260 ℃ | 4m | 360/300 N/cm |
| 10 | 0.5x 1mm | Fiberglass | 0.5mm | 420g /m 2 | -70 -260 ℃ | 4m | 310/290 N/cm |
| 11 | 2x 2.5mm | Fiberglass | 0.9mm | 600g /m 2 | -70 -260 ℃ | 3m | 390/320 N/ |
Application of the teflen conveyor belt:
teflen mesh conveyor belt has the characteristics of the mesh is
easy to breathe freely, so widely used in textile printing and
dyeing, printing drying conduction band, screen printing, UV
drying, UV series, light solid machine, offset printing machine,
dryer, non-woven drying machine, high frequency dryer, food baking
machine conduction band, temperature control chamber, flux type
rapid drying of ink and general water items such as drying
equipment.
Use case of teflen mesh conveyor belt
Use case of teflen mesh conveyor belt
The teflen high temperature cloth has the characteristics of high
temperature resistance, low friction coefficient and good
insulation.
