Polyester Spiral Dryer Screen Press Filter Mesh Belt Used For Paper
Pulp Paper Making Industry
Brief Introduction:
Polyester spiral dryer screen mesh screen belt with high abrasion
resistance, high drainage capacity and high mechanical anti
-deformation and fold formation capabilities are suitable for
abrasion mud. Due to the low organic matter in the sludge and easy
to suppress, spiral sieves can usually be used. The indisputable
advantage of using the spiral network is that the solid spiral
connector will not highlight the level of the network, so it
usually has a longer service life than the stainless steel
connector on the weaving network.
Connections:
The edges of the sieve are smoothed by thermal sealing, reinforced
in a width of about 4 cm with a two-component flexible adhesive.
The sieves are connected into an endless strip by a demountable
stainless steel (AISI 316) clipper joint. Another option for
connecting the sieve into an endless strip is a woven non-separable
joint, which has a longer service life than the clip joint, but can
only be used on machines that allow the installation of an endless
belt.
Filter screens are used as endless strips connected by a detachable
or non-separable joint.
The edges of the filter screens are melted and reinforced with
mechanically resistant flexible two-component adhesive. Triangular
reinforcement of the joint at the edges of the sieve increases the
mechanical resistance of the joint.
Usage:
Pressing of urban sludge in wastewater treatment plants
Pressing services for pulp and sludge
Fruit pressing services for the production of musts and wine
Pressing in the food industry
Separation of minerals in the mining industry
Sludge pressing in agriculture
Industrial separation processes
Advantages:
Very good drainage ability
Easy to clean
Universal sieve type for most industrial applications
Very high abrasion resistance
Long service life
For very abrasive sludges
Type
| Wire Diameter(mm) |
Density/cm | Strength(N/cm) Tensile strength |
Weight kg/m2 |
Thickness mm |
Air Permeability m3/m2h |
|
Warp |
Weft |
Warp |
Weft |
Surface |
Joint | | | |
| RK22903 | 0.50 | 0.90 | 23 | 5.5 | 1600 | 900 | 1.4 | 1.90 | 8480 |
| RK24908 | 0.50 | 0.90 | 24.8 | 7.1 | 1600 | 900 | 1.48 | 2.1 | 7360 |
| RK24808 | 0.50 | 0.80 | 24.8 | 8 | 1600 | 900 | 1.4 | 2.0 | 6880 |
| RK16903 | 0.70 | 0.90 | 16.3 | 5 | 1600 | 900 | 1.5 | 2.1 | 7520 |
| RK16903 Blue | 0.70 | 0.90 | 16.3 | 5.8/6 | 1600 | 900 | 1.7 | 2.1 | 5550/3980 |
| RK12904 | 0.90 | 0.90 | 12.3 | 9.5 | 1600 | 900 | 2.2 | 3.5 | 9600 |
